KickAss 3-Pin 50A Grey Anderson Style Connector

KickAss Three-pin Anderson Style Connector: Simplify Your DC-DC Charger Connections

Introducing the new KickAss Three-pin Anderson Style Connector, designed to eliminate the hassle of connecting your DC-DC charger. This innovative connector allows you to run your positive alternator, negative ground, and ignition wires together in a single, robust, and durable housing.

Key Features:

• Fully Insulated and Durable: Made from strong polycarbonate, this connector is fully insulated and rated to handle up to 50 amps.
• Cost-Effective and Safe: The single-piece housing ensures a secure connection while being cost-effective.
• Compatibility: Includes 4 Anderson terminals—3 terminals for 6AWG wire and 1 terminal for 10/12AWG wire.

Installation Instructions:

1. Preparation: Use a stripping tool or a Stanley knife to carefully strip back the cable sheathing if it's a twin-core cable.
2. Strip the Wires: Carefully strip back 1 cm of insulation from each single-core cable (positive and negative) using a stripping tool.
3. Attach Terminal Lugs: Attach the Anderson connector terminal lugs to the stripped cable ends. Use a crimping tool to securely crimp the terminal lugs onto the cable.
4. Verify Crimping: Ensure the terminal lugs are crimped correctly by making sure they are fixed in place and cannot be pulled off.
5. Connect to Anderson Plug: With the terminal lug lip facing up, attach the Anderson plug. Ensure the positive and negative cables are inserted into their designated sides (pos + and neg -).
6. Secure Cables: Push the cables through until the terminal lug lip latches over the spring clip at the end of the plug and clips in place. Verify both cables are securely fixed by pulling each one individually.

NOTE: Grey Anderson plugs are only inter-connectable with black and grey Anderson plugs. To remove the cables from the Anderson, plug once installed, use a small flathead screwdriver to push the spring clip down while pulling the individual cable out the back of the plug.

Ensure you understand the instructions before installation to guarantee a safe and effective connection.